RFmxLteMXComponentCarrier.GetNBIoTUplinkSubcarrierSpacing Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierGetNBIoTUplinkSubcarrierSpacing Method
Gets the subcarrier bandwidth of an NB-IoT signal. This method specifies the spacing between adjacent subcarriers.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int GetNBIoTUplinkSubcarrierSpacing( string selectorString, out RFmxLteMXNBIoTUplinkSubcarrierSpacing value )
Public Function GetNBIoTUplinkSubcarrierSpacing ( selectorString As String, <OutAttribute> ByRef value As RFmxLteMXNBIoTUplinkSubcarrierSpacing ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string. - value
- Type: NationalInstruments.RFmx.LteMXRFmxLteMXNBIoTUplinkSubcarrierSpacing
Upon return, contains the subcarrier bandwidth of an NB-IoT signal. This method specifies the spacing between adjacent subcarriers.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.
Remarks
This method gets the value of NBIoTUplinkSubcarrierSpacing attribute. The default value is SubcarrierSpacing15kHz.