RFmxLteMXSemComponentCarrierResults.FetchMeasurement Method

public int FetchMeasurement(
	string selectorString,
	double timeout,
	out double absoluteIntegratedPower,
	out double relativeIntegratedPower
)

Public Function FetchMeasurement ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef absoluteIntegratedPower As Double,
	<OutAttribute> ByRef relativeIntegratedPower As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

absoluteIntegratedPower

Type: SystemDouble
Upon return, contains the power measured over the integration bandwidth of the carrier.

relativeIntegratedPower

Type: SystemDouble
Upon return, contains the component carrier power relative to its subblock power.

Return Value

Reference