RFmxLteMXComponentCarrier.ConfigureDownlinkTestModel Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierConfigureDownlinkTestModel Method
Configures the E-UTRA Test Model type.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int ConfigureDownlinkTestModel( string selectorString, RFmxLteMXDownlinkTestModel downlinkTestModel )
Public Function ConfigureDownlinkTestModel ( selectorString As String, downlinkTestModel As RFmxLteMXDownlinkTestModel ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies a selector string comprising of the signal name, subblock number and carrier number. Example:
"subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string. - downlinkTestModel
- Type: NationalInstruments.RFmx.LteMXRFmxLteMXDownlinkTestModel
Specifies the E-UTRA Test Model type when you set the SetDownlinkChannelConfigurationMode(String, RFmxLteMXDownlinkChannelConfigurationMode) method to TestModel. Refer to section 6.1.1 of the 3GPP 36.141 specification for more information regarding test model configurations.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.