RFmxLteMXSemResults.GetLowerOffsetAbsolutePeakPower Method

public int GetLowerOffsetAbsolutePeakPower(
	string selectorString,
	out double value
)

Public Function GetLowerOffsetAbsolutePeakPower ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the result name, Offset number and Subblock number. Example: "Subblock0", "result::r1/Subblock0" or "result::r1/Subblock0/Offset0". You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: SystemDouble
Upon return, contains the peak power in the lower (negative) offset segment. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on the offset overlap rules, as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned. This value is expressed in dBm. Use "offset(k)" or "subblock(n)/offset(k)" as the selector string to read this result.

Return Value

Reference