RFmxLteMXModAccResults.FetchInBandEmissionMarginArray Method

public int FetchInBandEmissionMarginArray(
	string selectorString,
	double timeout,
	ref double[] inBandEmissionMargin
)

Public Function FetchInBandEmissionMarginArray ( 
	selectorString As String,
	timeout As Double,
	ByRef inBandEmissionMargin As Double()
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, and subblock number. If you do not specify the result name, the default result instance is used. Example:
"subblock0"
"result::r1/subblock0"
You can use the BuildSubblockString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

inBandEmissionMargin

Type: SystemDouble
Upon return, contains the array of the in-band emission margins. The margin is the least difference between the in-band emission measurement trace and limit trace. The limit is defined in section 6.5.2.3.5 of the 3GPP TS 36.521 specification. The in-band emissions are a measure of the interference falling into the non-allocated resources blocks.

Return Value

Reference