RFmx LTE DotNET

RFmxLteMXComponentCarrier.ConfigureDownlinkNumberOfSubframes Method

Download PDF

Updated2024-07-17
1 minute(s) read

RFmxLteMXComponentCarrierConfigureDownlinkNumberOfSubframes Method

Configures the number of unique subframes that are transmitted from the DUT.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.

Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)

Syntax

public int ConfigureDownlinkNumberOfSubframes(
	string selectorString,
	int numberOfSubframes
)

Public Function ConfigureDownlinkNumberOfSubframes ( 
	selectorString As String,
	numberOfSubframes As Integer
) As Integer

Parameters

selectorString: Type: SystemString
Specifies a selector string comprising of the signal name, subblock number and carrier number. Example:
"subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.
numberOfSubframes: Type: SystemInt32
Specifies the number of subframes to be configured. If you set the SetDownlinkChannelConfigurationMode(String, RFmxLteMXDownlinkChannelConfigurationMode) method to TestModel, this parameter will be set to 10 for FDD and 20 for TDD by default.

Return Value

Type: Int32
Returns the status code of this method. The status code either indicates success or describes a warning condition.

RFmx LTE DotNET

Table of Contents

RFmxLteMXComponentCarrier.ConfigureDownlinkNumberOfSubframes Method

Syntax

Parameters

Return Value

See Also

Reference

Log in to get a better experience