RFmxLteMXComponentCarrier.GetUplinkSequenceHoppingEnabled Method

public int GetUplinkSequenceHoppingEnabled(
	string selectorString,
	out RFmxLteMXUplinkSequenceHoppingEnabled value
)

Public Function GetUplinkSequenceHoppingEnabled ( 
	selectorString As String,
	<OutAttribute> ByRef value As RFmxLteMXUplinkSequenceHoppingEnabled
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string.

value

Type: NationalInstruments.RFmx.LteMXRFmxLteMXUplinkSequenceHoppingEnabled
Upon return, contains whether the base sequence number hopping for the demodulation reference signal (DMRS) is enabled, as defined in section 5.5.1.3 of the 3GPP TS 36.211 specification. This method is only applicable only when you set the SetPuschNumberOfResourceBlocks(String, Int32) method to a value greater than 5.

Return Value

Reference