RFmxLteMXModAccResults.FetchNPuschSymbolPower Method

public int FetchNPuschSymbolPower(
	string selectorString,
	double timeout,
	out double nPuschMeanDataPower,
	out double nPuschMeanDmrsPower
)

Public Function FetchNPuschSymbolPower ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef nPuschMeanDataPower As Double,
	<OutAttribute> ByRef nPuschMeanDmrsPower As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

nPuschMeanDataPower

Type: SystemDouble
Upon return, contains the mean value of the power calculated on the narrowband physical uplink shared channel (NPUSCH) data symbols over the slots specified by the SetMeasurementLength(String, Int32) method.
This value is expressed in dBm.

nPuschMeanDmrsPower

Type: SystemDouble
Upon return, contains the mean value of the power calculated on the NPUSCH DMRS over the slots specified by the ModAcc Meas Length method.
This value is expressed in dBm.

Return Value

Reference