RFmx LTE DotNET

Table of Contents

RFmxLteMXComponentCarrier.SetFrequency Method

  • Updated2024-07-17
  • 1 minute(s) read
RFmxLteMXComponentCarrier.SetFrequency Method

RFmxLteMXComponentCarrierSetFrequency Method

Sets the offset of the component carrier from the subblock center frequency that you configure in the Center Frequency method. This value is expressed in Hz. This method is applicable only if you set the ComponentCarrierSpacingType method to User.

Namespace:  NationalInstruments.RFmx.LteMX
Assembly:  NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)

Syntax

public int SetFrequency(
	string selectorString,
	double value
)
Public Function SetFrequency ( 
	selectorString As String,
	value As Double
) As Integer

Parameters

selectorString
Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string.
value
Type: SystemDouble
Specifies the offset of the component carrier from the subblock center frequency that you configure in the Center Frequency method. This value is expressed in Hz. This method is applicable only if you set the ComponentCarrierSpacingType method to User.

Return Value

Type: Int32
Returns the status code of this method. The status code either indicates success or describes a warning condition.

Remarks

This method sets the value of SetFrequency(String, Double) attribute. The default value is 0.

See Also

Log in to get a better experience