RFmxLteMXComponentCarrier.ConfigureDownlinkSynchronizationSignal Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierConfigureDownlinkSynchronizationSignal Method
Configures the synchronization signal power relative to the cell-specific reference signal.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int ConfigureDownlinkSynchronizationSignal( string selectorString, double pssPower, double sssPower )
Public Function ConfigureDownlinkSynchronizationSignal ( selectorString As String, pssPower As Double, sssPower As Double ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies a selector string comprising of the signal name, subblock number and carrier number. Example:
"subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string. - pssPower
- Type: SystemDouble
Specifies the power of the primary synchronization signal (PSS) relative to the power of the cell-specific reference signal. This value is expressed in dB. - sssPower
- Type: SystemDouble
Specifies the power of the secondary synchronization signal (SSS) relative to the power of the cell-specific reference signal. This value is expressed in dB.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.