RFmxLteMXComponentCarrier.ConfigurePsschModulationType Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierConfigurePsschModulationType Method
Configures the modulation scheme used in the physical sidelink shared channel (PSSCH) of the signal being measured.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int ConfigurePsschModulationType( string selectorString, RFmxLteMXPsschModulationType modulationType )
Public Function ConfigurePsschModulationType ( selectorString As String, modulationType As RFmxLteMXPsschModulationType ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies a selector string comprising of the signal name, subblock number and carrier number. Example:
"subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string. - modulationType
- Type: NationalInstruments.RFmx.LteMXRFmxLteMXPsschModulationType
Specifies the modulation scheme used in the PSSCH channel of the signal being measured. The default value is QPSK.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.