RFmxLteMXModAccResults.FetchCompositeMagnitudeAndPhaseError Method

public int FetchCompositeMagnitudeAndPhaseError(
	string selectorString,
	double timeout,
	out double meanRmsCompositeMagnitudeError,
	out double maximumPeakCompositeMagnitudeError,
	out double meanRmsCompositePhaseError,
	out double maximumPeakCompositePhaseError
)

Public Function FetchCompositeMagnitudeAndPhaseError ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef meanRmsCompositeMagnitudeError As Double,
	<OutAttribute> ByRef maximumPeakCompositeMagnitudeError As Double,
	<OutAttribute> ByRef meanRmsCompositePhaseError As Double,
	<OutAttribute> ByRef maximumPeakCompositePhaseError As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

meanRmsCompositeMagnitudeError

Type: SystemDouble
Upon return, contains the RMS mean value of the magnitude error calculated over the slots specified by the SetMeasurementLength(String, Int32) method on all the configured channels.

maximumPeakCompositeMagnitudeError

Type: SystemDouble
Upon return, contains the peak value of magnitude error calculated over the slots specified by the ModAcc Meas Length method on all the configured channels.

meanRmsCompositePhaseError

Type: SystemDouble
Upon return, contains the RMS mean value of the phase error calculated over the slots specified by the ModAcc Meas Length method on all the configured channels. This value is expressed in degrees.

maximumPeakCompositePhaseError

Type: SystemDouble
Upon return, contains the peak value of phase error calculated over the slots specified by the ModAcc Meas Length method on all thee configured channels. This value is expressed in degrees.

Return Value

Reference