RFmxLteMXSemResults.GetUpperOffsetMarginRelativePower Method

public int GetUpperOffsetMarginRelativePower(
	string selectorString,
	out double value
)

Public Function GetUpperOffsetMarginRelativePower ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the result name, Offset number and Subblock number. Example: "Subblock0", "result::r1/Subblock0" or "result::r1/Subblock0/Offset0". You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: SystemDouble
Upon return, contains the power at which the margin occurs in the upper (positive) offset segment relative to the total aggregated power. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on the offset overlap rules, as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned. This value is expressed in dB. Use "offset(k)" or "subblock(n)/offset(k)" as the selector string to read this result.

Return Value

Reference