RFmxLteMX.ConfigureRF Method

public int ConfigureRF(
	string selectorString,
	double centerFrequency,
	double referenceLevel,
	double externalAttenuation
)

Public Function ConfigureRF ( 
	selectorString As String,
	centerFrequency As Double,
	referenceLevel As Double,
	externalAttenuation As Double
) As Integer

Parameters

selectorString

Type: SystemString
Pass an empty string. The signal name that is passed when creating the signal configuration is used.

centerFrequency

Type: SystemDouble
Specifies the center frequency of the acquired RF signal for a single carrier. The parameter specifies the reference frequency of the subblock for intra-band carrier aggregation. The default value of this parameter is hardware dependent.

referenceLevel

Type: SystemDouble
Specifies the reference level which represents the maximum expected power of the RF input signal. This value is configured in dBm for RF devices and as Vpk-pk for baseband devices. The default value of this parameter is hardware dependent.

externalAttenuation

Type: SystemDouble
Specifies the attenuation of a switch or cable connected to the RF IN connector of the signal analyzer. This value is expressed in dB. For more information about attenuation, refer to the RF Attenuation and Signal Levels topic for your device in the NI RF Vector Signal Analyzers Help.

Return Value

Reference