RFmxLteMXSemResults.FetchUpperOffsetPowerArray Method

public int FetchUpperOffsetPowerArray(
	string selectorString,
	double timeout,
	ref double[] absoluteIntegratedPower,
	ref double[] relativeIntegratedPower,
	ref double[] absolutePeakPower,
	ref double[] peakFrequency,
	ref double[] relativePeakPower
)

Public Function FetchUpperOffsetPowerArray ( 
	selectorString As String,
	timeout As Double,
	ByRef absoluteIntegratedPower As Double(),
	ByRef relativeIntegratedPower As Double(),
	ByRef absolutePeakPower As Double(),
	ByRef peakFrequency As Double(),
	ByRef relativePeakPower As Double()
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, and subblock number. If you do not specify the result name, the default result instance is used. Example:
"subblock0"
"result::r1/subblock0"
You can use the BuildSubblockString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

absoluteIntegratedPower

Type: SystemDouble
Upon return, contains the array of upper offset segment powers. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

relativeIntegratedPower

Type: SystemDouble
Upon return, contains the array of powers in the upper offset segment relative to the value returned by the GetTotalAggregatedPower(String, Double) method. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

absolutePeakPower

Type: SystemDouble
Upon return, contains the array of peak powers in the upper offset segment. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

peakFrequency

Type: SystemDouble
Upon return, contains the array of frequency at which the peak power occurs in the upper (positive) offset segment. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

relativePeakPower

Type: SystemDouble
Upon return, contains the array of peak power in the upper (positive) offset segment relative to the value returned by the SEM Results Total Aggregated Pwr method. For the intra-band non-contiguous type of carrier aggregation, the offset segment may be truncated or discarded based on offset overlap rules as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned.

Return Value

Reference