RFmx LTE DotNET

Table of Contents

RFmxLteMXModAccResults.FetchCompositeEvm Method

  • Updated2024-07-17
  • 2 minute(s) read
RFmxLteMXModAccResults.FetchCompositeEvm Method

RFmxLteMXModAccResultsFetchCompositeEvm Method

Fetches the composite EVM for ModAcc measurements.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to read results from this method.

Namespace:  NationalInstruments.RFmx.LteMX
Assembly:  NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)

Syntax

public int FetchCompositeEvm(
	string selectorString,
	double timeout,
	out double meanRmsCompositeEvm,
	out double maximumPeakCompositeEvm,
	out double meanFrequencyError,
	out int peakCompositeEvmSymbolIndex,
	out int peakCompositeEvmSubcarrierIndex,
	out int peakCompositeEvmSlotIndex
)
Public Function FetchCompositeEvm ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef meanRmsCompositeEvm As Double,
	<OutAttribute> ByRef maximumPeakCompositeEvm As Double,
	<OutAttribute> ByRef meanFrequencyError As Double,
	<OutAttribute> ByRef peakCompositeEvmSymbolIndex As Integer,
	<OutAttribute> ByRef peakCompositeEvmSubcarrierIndex As Integer,
	<OutAttribute> ByRef peakCompositeEvmSlotIndex As Integer
) As Integer

Parameters

selectorString
Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.
timeout
Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.
meanRmsCompositeEvm
Type: SystemDouble
Upon return, contains the mean value of the RMS EVMs calculated on all configured channels over the slots specified by the SetMeasurementLength(String, Int32) method.
maximumPeakCompositeEvm
Type: SystemDouble
Upon return, contains the symbol index where the ModAcc maximum peak composite EVM occurs.
meanFrequencyError
Type: SystemDouble
Upon return, contains the estimated carrier frequency offset averaged over the slots specified by the ModAcc Meas Length method.
peakCompositeEvmSymbolIndex
Type: SystemInt32
Upon return, contains the symbol index where the ModAcc maximum peak composite EVM occurs.
peakCompositeEvmSubcarrierIndex
Type: SystemInt32
Upon return, contains the subcarrier index where the ModAcc maximum peak composite EVM occurs.
peakCompositeEvmSlotIndex
Type: SystemInt32
Upon return, contains the slot index where the ModAcc maximum peak composite EVM occurs.

Return Value

Type: Int32
Returns the status code of this method. The status code either indicates success or describes a warning condition.

See Also

Log in to get a better experience