RFmxLteMXSemComponentCarrierConfiguration.SetMaximumOutputPower Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXSemComponentCarrierConfigurationSetMaximumOutputPower Method
Sets the maximum output power, Pmax,c, per carrier that is used only to choose the limit table for Medium Range Base Station. For more details please refer to the section 6.6.3 of 3GPP 36.141 specification.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int SetMaximumOutputPower( string selectorString, double value )
Public Function SetMaximumOutputPower ( selectorString As String, value As Double ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string. - value
- Type: SystemDouble
Specifies the maximum output power, Pmax,c, per carrier that is used only to choose the limit table for Medium Range Base Station. For more details please refer to the section 6.6.3 of 3GPP 36.141 specification.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.
Remarks
This method sets the value of SetMaximumOutputPower(String, Double) attribute. The default value is 0. Valid values are within 38, inclusive. This property is considered only when you set the Link Direction property to Downlink, eNodeB Category property to Medium Range Base Station, and SEM DL Mask Type property to eNodeB Category Based.