RFmxLteMXSemResults.GetUpperOffsetMeasurementStatus Method

public int GetUpperOffsetMeasurementStatus(
	string selectorString,
	out RFmxLteMXSemUpperOffsetMeasurementStatus value
)

Public Function GetUpperOffsetMeasurementStatus ( 
	selectorString As String,
	<OutAttribute> ByRef value As RFmxLteMXSemUpperOffsetMeasurementStatus
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the result name, Offset number and Subblock number. Example: "Subblock0", "result::r1/Subblock0" or "result::r1/Subblock0/Offset0". You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: NationalInstruments.RFmx.LteMXRFmxLteMXSemUpperOffsetMeasurementStatus
Upon return, contains the measurement status based on the user-configured standard measurement limits and the failure criteria specified by Limit Fail Mask for the upper (positive) offset. For intra-band non-contiguous case, the offset segment may be truncated or discarded based on offset overlap rules defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned. Use "offset(k)" or "subblock(n)/offset(k)" as the selector string to read this result.

Return Value

Reference