RFmxLteMXComponentCarrier.SetNPuschNumberOfTones Method
- Updated2024-07-17
- 1 minute(s) read
RFmxLteMXComponentCarrierSetNPuschNumberOfTones Method
Sets the number of subcarriers (tones) within the 200 kHz bandwidth that is allocated to the narrowband physical uplink shared channel (NPUSCH).
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int SetNPuschNumberOfTones( string selectorString, int value )
Public Function SetNPuschNumberOfTones ( selectorString As String, value As Integer ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string. - value
- Type: SystemInt32
Specifies the number of subcarriers (tones) within the 200 kHz bandwidth that is allocated to the narrowband physical uplink shared channel (NPUSCH).
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.
Remarks
This method sets the value of NPuschNumberOfTones attribute. The default value is 1.For Format 1 and 15 kHz subcarrier spacing, the valid values are 1, 3, 6, and 12.For Format 1, 3.75 kHz subcarrier spacing, and Format 2, the valid value is 1.