RFmxLteMXAcpResults.GetUpperOffsetRelativePower Method

public int GetUpperOffsetRelativePower(
	string selectorString,
	out double value
)

Public Function GetUpperOffsetRelativePower ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the result name, Offset number and Subblock number. Example: "Subblock0", "result::r1/Subblock0" or "result::r1/Subblock0/Offset0". You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: SystemDouble
Upon return, contains the power in the upper (positive) offset channel relative to the total aggregated power. This value is expressed in dB. For the intra-band non-contiguous type of carrier aggregation, if this offset is not applicable, a NaN is returned. Refer to the 3GPP TS 36.521 specification for more information about the applicability of the offset channel. Use "offset(k)" or "subblock(n)/offset(k)" as the selector string to read this result.

Return Value

Reference