RFmxLteMXAcpConfiguration.GetOffsetFrequency Method

public int GetOffsetFrequency(
	string selectorString,
	out double value
)

Public Function GetOffsetFrequency ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the offset number and subblock number.
Example:
"subblock0" or
"subblock0/offset0".
You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: SystemDouble
Upon return, contains the offset frequency of an offset channel. This value is expressed in Hz. When you set the SetLinkDirection(String, RFmxLteMXLinkDirection) method to Uplink, the offset frequency is computed from the center of a reference component carrier/subblock to the center of the nearest RBW filter of the offset channel. When you set the Link Direction method to Downlink, the offset frequency is computed from the center of the closest component carrier to the center of the nearest RBW filter of the offset channel.

Return Value

Reference