RFmxLteMXAcpConfiguration.GetNumberOfUtraOffsets Method
- Updated2024-07-17
- 2 minute(s) read
RFmxLteMXAcpConfigurationGetNumberOfUtraOffsets Method
Gets the number of universal terrestrial radio access (UTRA) adjacent channel offsets to be configured at offset positions, when you set the ACP Configurable Number of Offset Enabled method to True.
Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public int GetNumberOfUtraOffsets( string selectorString, out int value )
Public Function GetNumberOfUtraOffsets ( selectorString As String, <OutAttribute> ByRef value As Integer ) As Integer
Parameters
- selectorString
- Type: SystemString
Specifies the subblock number.
Example: "subblock0".
You can use the BuildSubblockString(String, Int32) method to build the selector string. - value
- Type: SystemInt32
Upon return, contains the number of universal terrestrial radio access (UTRA) adjacent channel offsets to be configured at offset positions, when you set the ACP Configurable Number of Offset Enabled method to True.
Return Value
Type: Int32Returns the status code of this method. The status code either indicates success or describes a warning condition.
Remarks
This method gets the value of AcpNumberOfUtraOffsets attribute. The default value is 1, when you set the CC Bandwidth to 200.0 k. The default value is 0, when you set the Band property to 46 or Duplex Scheme property to LAA. The default value is 2 for all other configurations. In case of downlink, only 3GPP specification defined values are supported. In case of non-contiguous carrier aggregation, the configured value will be used only for the outer offsets and the offset channels in the gap region are defined as per the 3GPP specification. Offset power reference for the outer UTRA offsets are set according to the value of ACP EUTRA Offset Definition property.