RFmxLteMXModAccResults.FetchNPuschDataEvm Method

public int FetchNPuschDataEvm(
	string selectorString,
	double timeout,
	out double nPuschMeanRmsDataEvm,
	out double nPuschMaximumPeakDataEvm
)

Public Function FetchNPuschDataEvm ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef nPuschMeanRmsDataEvm As Double,
	<OutAttribute> ByRef nPuschMaximumPeakDataEvm As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

nPuschMeanRmsDataEvm

Type: SystemDouble
Upon return, contains the mean value of the RMS EVMs calculated on the NPUSCH data symbols over the slots specified by the SetMeasurementLength(String, Int32) method. When you set the SetEvmUnit(String, RFmxLteMXModAccEvmUnit) method to Percentage, the result is returned as a percentage, and when you set the ModAcc EVM Unit method to dB, the result is returned in dB.

nPuschMaximumPeakDataEvm

Type: SystemDouble
Upon return, contains the maximum value of the peak EVMs calculated on the NPUSCH data symbols over the slots specified by the ModAcc Meas Length method. When you set the ModAcc EVM Unit method to Percentage, the result is returned as a percentage. When you set the ModAcc EVM Unit method to dB, the result is returned in dB.

Return Value

Reference