RFmxLteMXModAccResults.FetchPuschDmrsEvm Method

public int FetchPuschDmrsEvm(
	string selectorString,
	double timeout,
	out double meanRmsDmrsEvm,
	out double maximumPeakDmrsEvm
)

Public Function FetchPuschDmrsEvm ( 
	selectorString As String,
	timeout As Double,
	<OutAttribute> ByRef meanRmsDmrsEvm As Double,
	<OutAttribute> ByRef maximumPeakDmrsEvm As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.

timeout

Type: SystemDouble
Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

meanRmsDmrsEvm

Type: SystemDouble
Upon return, contains the mean value of RMS EVMs calculated on PUSCH DMRS over the slots specified by the SetMeasurementLength(String, Int32) method. This value is expressed in dB or in percentage.

maximumPeakDmrsEvm

Type: SystemDouble
Upon return, contains the maximum value of peak EVMs calculated on PUSCH DMRS over the slots specified by the ModAcc Meas Length method. This value is expressed in dB or in percentage.

Return Value

Reference