RFmx LTE DotNET

RFmxLteMXComponentCarrier.ConfigureNBIoTComponentCarrier Method

Download PDF

Updated2024-07-17
1 minute(s) read

RFmxLteMXComponentCarrierConfigureNBIoTComponentCarrier Method

Configures the Ncell ID and Uplink Subcarrier Spacing parameters for the NB-IoT signal.
Use "carrier(k)" or "subblock(n)/carrier(k)" as the selector string to configure this method.

Namespace: NationalInstruments.RFmx.LteMX
Assembly: NationalInstruments.RFmx.LteMX.Fx40 (in NationalInstruments.RFmx.LteMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)

Syntax

public int ConfigureNBIoTComponentCarrier(
	string selectorString,
	int nCellID,
	RFmxLteMXNBIoTUplinkSubcarrierSpacing uplinkSubcarrierSpacing
)

Public Function ConfigureNBIoTComponentCarrier ( 
	selectorString As String,
	nCellID As Integer,
	uplinkSubcarrierSpacing As RFmxLteMXNBIoTUplinkSubcarrierSpacing
) As Integer

Parameters

selectorString: Type: SystemString
Specifies a selector string comprising of the signal name, subblock number and carrier number. Example:
"subblock0/carrier0"
You can use the BuildCarrierString(String, Int32) method to build the selector string.
nCellID: Type: SystemInt32
Specifies the narrowband physical layer cell identity.
uplinkSubcarrierSpacing: Type: NationalInstruments.RFmx.LteMXRFmxLteMXNBIoTUplinkSubcarrierSpacing
Specifies the subcarrier bandwidth of an NB-IoT signal. This parameter specifies the spacing between adjacent subcarriers.

Return Value

Type: Int32
Returns the status code of this method. The status code either indicates success or describes a warning condition.

RFmx LTE DotNET

Table of Contents

RFmxLteMXComponentCarrier.ConfigureNBIoTComponentCarrier Method

Syntax

Parameters

Return Value

See Also

Reference

Log in to get a better experience