RFmxLteMXSemResults.GetLowerOffsetPeakFrequency Method

public int GetLowerOffsetPeakFrequency(
	string selectorString,
	out double value
)

Public Function GetLowerOffsetPeakFrequency ( 
	selectorString As String,
	<OutAttribute> ByRef value As Double
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the result name, Offset number and Subblock number. Example: "Subblock0", "result::r1/Subblock0" or "result::r1/Subblock0/Offset0". You can use the BuildOffsetString(String, Int32) method to build the selector string.

value

Type: SystemDouble
Upon return, contains the frequency at which the peak power occurs in the lower (negative) offset segment. For the type of carrier aggregation, the offset segment may be truncated or discarded based on the offset overlap rules, as defined in the 3GPP TS 36.521 specification. If the offset segment is truncated, the measurement is performed on the updated offset segment. If the offset segment is discarded, a NaN is returned. This value is expressed in Hz. Use "offset(k)" or "subblock(n)/offset(k)" as the selector string to read this result.

Return Value

Reference