RFmxLteMXComponentCarrier.SetUplinkSequenceHoppingEnabled Method

public int SetUplinkSequenceHoppingEnabled(
	string selectorString,
	RFmxLteMXUplinkSequenceHoppingEnabled value
)

Public Function SetUplinkSequenceHoppingEnabled ( 
	selectorString As String,
	value As RFmxLteMXUplinkSequenceHoppingEnabled
) As Integer

Parameters

selectorString

Type: SystemString
Specifies the carrier number and subblock number.
Example:
"subblock0" or
"subblock0/carrier0".
You can use the BuildCarrierString(String, Int32) method to build the selector string.

value

Type: NationalInstruments.RFmx.LteMXRFmxLteMXUplinkSequenceHoppingEnabled
Specifies whether the base sequence number hopping for the demodulation reference signal (DMRS) is enabled, as defined in section 5.5.1.3 of the 3GPP TS 36.211 specification. This method is only applicable only when you set the SetPuschNumberOfResourceBlocks(String, Int32) method to a value greater than 5.

Return Value

Reference