AnalogWindowReferenceTrigger Class
- Updated2023-02-21
- 4 minute(s) read
Contains properties to configure analog windowreference triggers. For more information, refer to ReferenceTrigger.
Inheritance Hierarchy
SystemObject
SystemMarshalByRefObject
NationalInstruments.DAQmxAnalogWindowReferenceTrigger
SystemMarshalByRefObject
NationalInstruments.DAQmxAnalogWindowReferenceTrigger
Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302
Syntax
public class AnalogWindowReferenceTrigger : MarshalByRefObject, IFilteredTypeDescriptor
Public Class AnalogWindowReferenceTrigger Inherits MarshalByRefObject Implements IFilteredTypeDescriptor
The AnalogWindowReferenceTrigger type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | Condition | Specifies whether the Reference Trigger occurs when the source signal enters the window or when it leaves the window. Use WindowBottom and WindowTop to specify the window. |
| Coupling | Specifies the coupling for the source signal of the trigger if the source is a terminal rather than a virtual channel. |
| DigitalFilterEnable | Specifies whether to apply a digital filter to the digital output of the analog triggering circuitry (the Analog Comparison Event). When enabled, the analog signal must stay within the trigger window for the minimum pulse width before being recognized. Use filtering for noisy trigger signals that transition in and out of the window rapidly. |
| DigitalFilterMinimumPulseWidth | Specifies in seconds the minimum pulse width the filter recognizes. |
| DigitalFilterTimebaseRate | Specifies in hertz the rate of the digital filter timebase. NI-DAQmx uses this value to compute settings for the filter. |
| DigitalFilterTimebaseSource | Specifies the terminal of the signal to use as the timebase of the digital filter. |
| DigitalSynchronizationEnable | Specifies whether to synchronize recognition of transitions in the signal to the internal timebase of the device. |
| Source | Specifies the name of a virtual channel or terminal where there is an analog signal to use as the source of the Reference Trigger. |
| WindowBottom | Specifies the lower limit of the window. Specify this value in the units of the measurement. |
| WindowTop | Specifies the upper limit of the window. Specify this value in the units of the measurement. |
Methods
| Name | Description | |
|---|---|---|
 | CreateObjRef | Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject.) |
| Equals | Determines whether the specified Object is equal to the current Object. (Inherited from Object.) |
 | Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object.) |
| GetHashCode | Serves as a hash function for a particular type. (Inherited from Object.) |
| GetLifetimeService | Retrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject.) |
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| InitializeLifetimeService | Obtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject.) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object.) |
| MemberwiseClone(Boolean) | Creates a shallow copy of the current MarshalByRefObject object. (Inherited from MarshalByRefObject.) |
| ToString | Returns a string representation of the object. (Overrides ObjectToString.) |
Remarks
 Tip |
|---|
| Example applications are located in the Public Documents\National Instruments\NI-DAQ\Examples\DotNET4.x directory or in the Start menu at National InstrumentsNI-DAQmxNI-DAQmx Examples. |
Thread Safety
Any public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe.