NI-DAQmx .NET Framework 4.0 API Reference

AIChannel.InputLimitsFaultDetectUpperLimit Property

Download PDF

Updated2023-02-21
1 minute(s) read

Specifies the level of the upper limit for input limits detection. An input sample outside the upper and lower bounds causes a fault. Note: Fault detection applies to both positive and negative inputs. For instance, if you specify a lower limit of 2 mA and an upper limit of 12 mA, NI-DAQmx detects a fault at 15 mA and -15 mA, but not at -6 mA because it is in the range of -12 mA to -2 mA.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public double InputLimitsFaultDetectUpperLimit { get; set; }

Public Property InputLimitsFaultDetectUpperLimit As Double
	Get
	Set

Property Value

Type: Double
Specifies the level of the upper limit for input limits detection. An input sample outside the upper and lower bounds causes a fault. Note: Fault detection applies to both positive and negative inputs. For instance, if you specify a lower limit of 2 mA and an upper limit of 12 mA, NI-DAQmx detects a fault at 15 mA and -15 mA, but not at -6 mA because it is in the range of -12 mA to -2 mA.

Exceptions

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

AIChannel.InputLimitsFaultDetectUpperLimit Property

Syntax

Property Value

Exceptions

See Also

Reference

Log in to get a better experience