NI-DAQmx .NET Framework 4.0 API Reference

AnalogLevelPauseTrigger.Hysteresis Property

Download PDF

Updated2023-02-21
1 minute(s) read

Specifies a hysteresis level in the units of the measurement or generation. If Condition is AboveLevel, the trigger does not deassert until the source signal passes below Level minus the hysteresis. If Condition is BelowLevel, the trigger does not deassert until the source signal passes above Level plus the hysteresis. Hysteresis is always enabled. Set this property to a non-zero value to use hysteresis.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public double Hysteresis { get; set; }

Public Property Hysteresis As Double
	Get
	Set

Property Value

Type: Double
Specifies a hysteresis level in the units of the measurement or generation. If Condition is AboveLevel, the trigger does not deassert until the source signal passes below Level minus the hysteresis. If Condition is BelowLevel, the trigger does not deassert until the source signal passes above Level plus the hysteresis. Hysteresis is always enabled. Set this property to a non-zero value to use hysteresis.

Exceptions

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

AnalogLevelPauseTrigger.Hysteresis Property

Syntax

Property Value

Exceptions

See Also

Reference

Log in to get a better experience