NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup153x Method

Download PDF

Configures the gain value for an SCXI-1530 or SCXI-1531 module calibration task.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

public void Setup153x(
	string physicalChannels,
	double gain
)

Public Sub Setup153x ( 
	physicalChannels As String,
	gain As Double
)

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

You can measure calibration input and output points by supplying reference signals to the specified channel and measuring the outputs.

Note
The terminal on which to measure module output depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0± pins of the rear signal connector. Refer to the SCXI-1530/1531 User Manual for more information on the routing of module output.