NI-DAQmx .NET Framework 4.0 API Reference

DaqStream.ReadInputLimitsFaultChannelsExist Property

Download PDF

Updated2023-02-21
2 minute(s) read

Indicates if the device or devices detected a sample that was outside the upper or lower limits configured for each channel in the task. Reading this property clears the input limits fault channel status for all channels in the task. You must read this property before you read ReadInputLimitsFaultChannels. Otherwise, you will receive an error. Note: Fault detection applies to both positive and negative inputs. For instance, if you specify a lower limit of 2 mA and an upper limit of 12 mA, NI-DAQmx detects a fault at 15 mA and -15 mA, but not at -6 mA because it is in the range of -12 mA to -2 mA.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public bool ReadInputLimitsFaultChannelsExist { get; }

Public ReadOnly Property ReadInputLimitsFaultChannelsExist As Boolean
	Get

Property Value

Type: Boolean
Indicates if the device or devices detected a sample that was outside the upper or lower limits configured for each channel in the task. Reading this property clears the input limits fault channel status for all channels in the task. You must read this property before you read ReadInputLimitsFaultChannels. Otherwise, you will receive an error. Note: Fault detection applies to both positive and negative inputs. For instance, if you specify a lower limit of 2 mA and an upper limit of 12 mA, NI-DAQmx detects a fault at 15 mA and -15 mA, but not at -6 mA because it is in the range of -12 mA to -2 mA.

Exceptions

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

DaqStream.ReadInputLimitsFaultChannelsExist Property

Syntax

Property Value

Exceptions

See Also

Reference

Log in to get a better experience