NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup1503 Method

Download PDF

Configures the calibration task for an SCXI-1503 module.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

public void Setup1503(
	string physicalChannels,
	double gain
)

Public Sub Setup1503 ( 
	physicalChannels As String,
	gain As Double
)

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

You can measure calibration input/output points by supplying reference signals to the specified channel and measuring the outputs.

Note
The terminal on which to measure module output depends on the configuration of the module in MAX. National Instruments recommends cabling the module to the digitizer so that the output appears on the MCH0± pins of the rear signal connector.