NI-DAQmx .NET Framework 4.0 API Reference

ExternalCalibrationSession.Setup9262 Method

Download PDF

Updated2023-02-21
1 minute(s) read

Writes the specified binary value to the DAC on the specified physical channel. This method requires a sweep of DAC values obtained from Get9262AdjustmentPoints.

Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.40.49302

Syntax

public void Setup9262(
	string physicalChannels,
	int value
)

Public Sub Setup9262 ( 
	physicalChannels As String,
	value As Integer
)

Parameters

physicalChannels: Type: SystemString
Specifies the name of the physical channel to use to create the virtual channel. The DAQmx physical channel constant lists all physical channels for devices installed in the system. You cannot specify more than one physical channel.
value: Type: SystemInt32
The binary number to write to the DAC.

Exceptions

Exception	Condition
DaqException	The NI-DAQmx driver returned an error.

Remarks

Refer to the calibration procedure for your device for detailed calibration instructions.

Note
After you commit the calibration, you cannot undo it. If any calibration settings are incorrect, you must recalibrate the device.

NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents

ExternalCalibrationSession.Setup9262 Method

Syntax

Parameters

Exceptions

Remarks

See Also

Reference

Log in to get a better experience