NI-DAQmx .NET Framework 4.0 API Reference

Table of Contents
Table of Contents

DigitalEdgeReferenceTrigger Properties

Download PDF
Selected SectionSelected Section and Subsection(s)Entire Manual
  • Updated2023-02-21
  • 2 minute(s) read
DigitalEdgeReferenceTrigger Properties

The DigitalEdgeReferenceTrigger type exposes the following members.

Properties

  NameDescription
Public propertyDigitalFilterEnable
Specifies whether to apply a digital filter to the trigger signal.
Public propertyDigitalFilterMinimumPulseWidth
Specifies in seconds the minimum pulse width the filter recognizes.
Public propertyDigitalFilterTimebaseRate
Specifies in hertz the rate of the digital filter timebase. NI-DAQmx uses this value to compute settings for the filter.
Public propertyDigitalFilterTimebaseSource
Specifies the terminal of the signal to use as the timebase of the digital filter.
Public propertyDigitalSynchronizationEnable
Specifies whether to synchronize recognition of transitions in the signal to the internal timebase of the device.
Public propertyEdge
Specifies on what edge of a digital pulse the Reference Trigger occurs.
Public propertySource
Specifies the name of a terminal where there is a digital signal to use as the source of the Reference Trigger.
Top

See Also

Previous

No previous section

Next

No next section

Previous

No previous section

Next

No next section

Log in to get a better experience

Log in