DCPowerOutputSourceCompleteEventPulse.Width Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputSourceCompleteEventPulseWidth Property
Gets or sets the width, in seconds, of the SourceCompleteEvent pulse.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public PrecisionTimeSpan Width { get; set; }
Public Property Width As PrecisionTimeSpan Get Set
Property Value
Type: PrecisionTimeSpanThe minimum event pulse width value for the NI PXI-4132 is 150 ns, and the minimum event pulse width value for PXI Express devices is 250 ns.
The maximum event pulse width value for all devices is 1.6 microseconds.
Remarks
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |
| Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |
| Note |
|---|
| To use the per-channel version of this property, you must first initialize the session with the NIDCPower(String, Boolean, String) constructor. If the session was initialized with a deprecated constructor, use the per-session version of this property instead or include all channels. |