DCPowerOutputSequenceAdvanceTrigger.ConfigureSoftwareEdgeTrigger Method
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputSequenceAdvanceTriggerConfigureSoftwareEdgeTrigger Method
Configures the SequenceAdvanceTrigger trigger for software edge triggering for the specified channel(s).
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public void ConfigureSoftwareEdgeTrigger()
Public Sub ConfigureSoftwareEdgeTrigger
Exceptions
| Exception | Condition |
|---|---|
| ObjectDisposedException | The method was called after the associated NIDCPower object was disposed. |
| OperationNotSupportedException | The method was called to unsupported hardware. |
| SelectorNameException | The method was called with an unknown channel name. |
| IviCDriverException | The underlying NI-DCPower driver returned an error. |
Remarks
 Note |
|---|
| This method cannot be called for channels that are in the Running state. Refer to the Programming States topic in the NI DC Power Supplies and SMUs Help for information about the specific NI-DCPower software states. |
| Note |
|---|
| This method is not supported by all instruments. Refer to the Supported Functions by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |