DCPowerOutputSourceOutputCutoff.VoltageChangeLimitLow Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputSourceOutputCutoffVoltageChangeLimitLow Property
Specifies a limit for negative voltage slew rate, in volts per microsecond, for output cutoff. If the voltage decreases at a rate that exceeds this limit, the output is disconnected.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public double VoltageChangeLimitLow { get; set; }
Public Property VoltageChangeLimitLow As Double Get Set
Property Value
Type: DoubleRepresents a threshold on negative voltage slew rate for output cutoff.
Remarks
To find out whether an output has exceeded this limit, call the QueryLatchedOutputCutoffState(String, DCPowerOutputCutoffReason) method with OutputCutoffReasonVoltageChangeLow as the outputCutoffReason.
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |
| Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |