DCPowerOutputSourcePulseVoltage.CurrentLimit Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputSourcePulseVoltageCurrentLimit Property
Specifies the current limit, in amperes, that the output cannot exceed when generating the desired voltage on the specified channel(s) during the on phase of a pulse.
This property is applicable only if the Function property is set to PulseVoltage
and the DCPowerComplianceLimitSymmetry property is set to Symmetric.
A channel must be enabled for the specified current limit to take effect. Refer to the Enabled property for more information about enabling the output channel.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public double CurrentLimit { get; set; }
Public Property CurrentLimit As Double Get Set
Property Value
Type: DoubleThe valid values for this property are defined by the values you specify for the CurrentLimitRange property.
Remarks
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |