DCPowerOutputSourceOutputCutoff.VoltageChangeLimitHigh Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputSourceOutputCutoffVoltageChangeLimitHigh Property
Specifies a limit for positive voltage slew rate, in volts per microsecond, for output cutoff. If the voltage increases at a rate that exceeds this limit, the output is disconnected.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public double VoltageChangeLimitHigh { get; set; }
Public Property VoltageChangeLimitHigh As Double Get Set
Property Value
Type: DoubleRepresents a threshold on positive voltage slew rate for output cutoff.
Remarks
To find out whether an output has exceeded this limit, call the QueryLatchedOutputCutoffState(String, DCPowerOutputCutoffReason) method with OutputCutoffReasonVoltageChangeHigh as the outputCutoffReason.
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |
| Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |