DCPowerOutputDigitalEdgeSourceTrigger.InputTerminal Property
- Updated2024-01-04
- 2 minute(s) read
DCPowerOutputDigitalEdgeSourceTriggerInputTerminal Property
Gets or sets the input terminal for the SourceTrigger.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public DCPowerDigitalEdgeSourceTriggerInputTerminal InputTerminal { get; set; }
Public Property InputTerminal As DCPowerDigitalEdgeSourceTriggerInputTerminal Get Set
Property Value
Type: DCPowerDigitalEdgeSourceTriggerInputTerminalSpecifies the DCPowerDigitalEdgeSourceTriggerInputTerminal value.
Exceptions
| Exception | Condition |
|---|---|
| ObjectDisposedException | The property was accessed after the associated NIDCPower object was disposed. |
| OperationNotSupportedException | The property was accessed to unsupported hardware. |
| SelectorNameException | The property was accessed with an unknown channel name. |
| ArgumentNullException | The property was set with a null input terminal. |
| IviCDriverException | The underlying NI-DCPower driver returned an error. |
Remarks
Use this property only when the Type property is set to DigitalEdge.
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |
| Note |
|---|
| This property is not supported by all instruments. Refer to the Supported Properties by Device topic in the NI DC Power Supplies and SMUs Help for information about supported instruments. |
Specify the input terminal using the form /Dev1/PXI_Trig0, where Dev1 is the instrument and PXI_Trig0 is the terminal. The input terminal can also be a terminal from another instrument. For example, you can set the input terminal on Dev1 to be /Dev2/Engine0/SourceCompleteEvent, where Engine0 is channel 0.
| Note |
|---|
| You must specify the input terminal for a PXI-4132 using the form /Dev1/PXI_Trig0, where Dev1 is a PXI-4132 and PXI_Trig0 is the terminal. |
| Note |
|---|
| To use the per-channel version of this property, you must first initialize the session with the NIDCPower(String, Boolean, String) constructor. If the session was initialized with a deprecated constructor, use the per-session version of this property instead or include all channels. |