DCPowerOutputSourceVoltage.CurrentLimitHigh Property
- Updated2024-01-04
- 1 minute(s) read
DCPowerOutputSourceVoltageCurrentLimitHigh Property
Gets or sets the current limit high, in amperes, for the output not to exceed when generating the desired voltage level on the specified channel(s).
This property is applicable only if the DCPowerSourceOutputFunction property is set to DCVoltage
and the DCPowerComplianceLimitSymmetry property is set to Asymmetric.
The channel must be enabled for the specified current limit high to take effect. Refer to the Enabled property for more information about enabling the output channel.
Namespace: NationalInstruments.ModularInstruments.NIDCPower
Assembly: NationalInstruments.ModularInstruments.NIDCPower.Fx45 (in NationalInstruments.ModularInstruments.NIDCPower.Fx45.dll) Version: 2023
Syntax
public double CurrentLimitHigh { get; set; }
Public Property CurrentLimitHigh As Double Get Set
Property Value
Type: DoubleThe valid values for this property are defined by the values you specify for the CurrentLimitRange property.
Remarks
 Note |
|---|
| NI-DCPower uses the terms "source" and "output". However, while sinking with electronic loads and SMUs these correspond to "sinking" and "input", respectively. |