RFmxInstrMX.ConfigureExternalAttenuationInterpolationLinear Method

public int ConfigureExternalAttenuationInterpolationLinear(
	string selectorString,
	string tableName,
	RFmxInstrMXLinearInterpolationFormat format
)

Public Function ConfigureExternalAttenuationInterpolationLinear ( 
	selectorString As String,
	tableName As String,
	format As RFmxInstrMXLinearInterpolationFormat
) As Integer

Parameters

selectorString  String

Specifies the calibration plane name in which the external attenuation table is stored. This input accepts the calibration plane name with the "calplane::" prefix. If you do not specify the calibration plane name, the default calibration plane instance is used. The default value is "" (empty string).

Note
For PXIe-5830/5831/5832 devices, port names should also be specified along with Calplane names. Hence, the valid selector is "calplane::<calplaneName>/port::<portName>". If you specify "port::all", all ports are considered configured. Use RFmxInstrMX.GetAvailablePorts method to get the valid port names.

Example:

""

"calplane::plane0"

"calplane::plane0/port::if0"

"port::if0"

"calplane::plane0/port::all"

tableName  String

Specifies the name to be associated with either the S-parameter table or the external attenuation table within a calibration plane. Provide a unique name, such as "table1" to configure the table.

format  RFmxInstrMXLinearInterpolationFormat

Specifies the format of parameters to interpolate.

Return Value

Reference