NI-DAQmx .NET Framework 4.5 API Reference

Table of Contents
Table of Contents

ReferenceTrigger Methods

Download PDF
Selected SectionSelected Section and Subsection(s)Entire Manual
  • Updated2023-02-21
  • 3 minute(s) read
ReferenceTrigger Methods

The ReferenceTrigger type exposes the following members.

Methods

  NameDescription
Public methodConfigureAnalogEdgeTrigger
Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal reaches the level you specify; and the device acquires all post-trigger samples.
Public methodConfigureAnalogMultiEdgeTrigger
Configures the task to stop the acquisition when the device acquires all pretrigger samples, any of the configured analog signals reaches the levels you specify, and the device acquires all post-trigger samples.
Public methodConfigureAnalogWindowTrigger
Configures the task to stop the acquisition when the device acquires all pretrigger samples; an analog signal enters or leaves a range you specify; and the device acquires all post-trigger samples.
Public methodConfigureDigitalEdgeTrigger
Configures the task to stop the acquisition when the device acquires all pretrigger samples, detects a rising or falling edge of a digital signal, and acquires all post-trigger samples.
Public methodConfigureDigitalPatternTrigger
Configures a task to stop the acquisition when the device acquires all pretrigger samples, matches a digital pattern, and acquires all posttrigger samples.
Public methodConfigureNone
Disables reference triggering for the measurement.
Public methodCreateObjRef
Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object.
(Inherited from MarshalByRefObject.)
Public methodEquals
Determines whether the specified object is equal to the current object.
(Inherited from Object.)
Protected methodFinalize
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object.)
Public methodGetHashCode
Serves as the default hash function.
(Inherited from Object.)
Public methodGetLifetimeService
Retrieves the current lifetime service object that controls the lifetime policy for this instance.
(Inherited from MarshalByRefObject.)
Public methodGetType
Gets the Type of the current instance.
(Inherited from Object.)
Public methodInitializeLifetimeService
Obtains a lifetime service object to control the lifetime policy for this instance.
(Inherited from MarshalByRefObject.)
Protected methodMemberwiseClone
Creates a shallow copy of the current Object.
(Inherited from Object.)
Protected methodMemberwiseClone(Boolean)
Creates a shallow copy of the current MarshalByRefObject object.
(Inherited from MarshalByRefObject.)
Public methodToString
Returns a string representation of the object.
(Overrides ObjectToString.)
Top

See Also

Previous

No previous section

Next

No next section

Previous

No previous section

Next

No next section

Log in to get a better experience

Log in