NI-DAQmx .NET Framework 4.5 API Reference

Table of Contents

ExternalCalibrationSession.Adjust11637 Method

Download PDF
Selected SectionSelected Section and Subsection(s)Entire Manual
  • Updated2023-02-21
  • 1 minute(s) read
ExternalCalibrationSession.Adjust11637 Method
Adjusts theexternal calibrationconstants for an NI FD-11637 device bank.

Namespace:  NationalInstruments.DAQmx
Assembly:  NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.45.49302

Syntax

public void Adjust11637(
	double value,
	out double actualReading,
	out double asFoundGainError,
	out double asFoundOffsetError
)
Public Sub Adjust11637 ( 
	value As Double,
	<OutAttribute> ByRef actualReading As Double,
	<OutAttribute> ByRef asFoundGainError As Double,
	<OutAttribute> ByRef asFoundOffsetError As Double
)

Parameters

value
Type: SystemDouble
Specifies the reference value measured using a calibrator.
actualReading
Type: SystemDouble
Specifies the reading that the device being calibrated acquired.
asFoundGainError
Type: SystemDouble
Specifies the gain error found for the device being calibrated.
asFoundOffsetError
Type: SystemDouble
Specifies the offset error found for the device being calibrated.

Exceptions

ExceptionCondition
DaqExceptionThe NI-DAQmx driver returned an error.

Remarks

Refer to thecalibration procedure for your devicefor detailed calibration instructions.
Note Note
After you commit the calibration, you cannot undo it. If any calibration settings are incorrect, you must recalibrate the device.

See Also

Previous

No previous section

Next

No next section

Previous

No previous section

Next

No next section

Log in to get a better experience

Log in