ExternalCalibrationSession.Get4304AdjustmentPoints Method
- Updated2023-02-21
- 1 minute(s) read
Returns the reference voltage values to be used by a reference device to create a reference signal.
Namespace: NationalInstruments.DAQmx
Assembly: NationalInstruments.DAQmx (in NationalInstruments.DAQmx.dll) Version: 20.7.45.49302
Syntax
public double[] Get4304AdjustmentPoints()
Public Function Get4304AdjustmentPoints As Double()
Return Value
Type: DoubleA 1D array of reference voltage values.
Exceptions
| Exception | Condition |
|---|---|
| DaqException | The NI-DAQmx driver returned an error. |
Remarks
Refer to the calibration procedure for your device for detailed calibration instructions.
 Note |
|---|
| After you commit the calibration, you cannot undo it. If any calibration settings are incorrect, you must recalibrate the device. |