Spec Mapping View
- Updated2023-10-19
- 2 minute(s) read
Spec Mapping View
Every measurement data sample in Specification Compliance Manager must map to a specification to be included in compliance health calculations. Typically, specification mapping occurs within the measurement data file while measurements are taken. If needed, the Spec Mapping view provides capabilities to map measurement data to product specifications within Specification Compliance Manager.
This view contains a table with rows for each product specification defined in the Spec view. You can filter this table to display only a single specification category and you can use the search button to locate a specification within the table.
Each specification row has a drop-down menu to select a mapping rule and a drop-down menu to select the measurement data for the operation. After all mapping rules and measurement data are set, you can select the checkbox in each affected row and click Run Selected Rules to apply the changes. Refer to Defining and Applying Specification Mapping Rules for additional instructions about applying specification mapping rules.
Click the help icon (
) on the Spec
Mapping view for an example of each specification mapping rule. Refer to
the following table for a description of each specification mapping rule in
Specification Compliance Manager.
| Icon | Name | Description |
|---|---|---|
 |
Replace | Removes any existing links to the specification and creates a new link between the specification and the selected measurement(s). |
 |
Append | Creates a new link between the specification and the selected measurement(s) without changing any existing relationships. |
 |
Clear | Removes any existing links between the specification and measurement data. |
Specification mapping rules are unique for each discipline in the Specification Compliance Manager interface. When analyzing data across multiple disciplines, verify that mapping rules are set correctly for each discipline to ensure that all measurement data is prepared correctly.
Related Information
- Uploading Specifications for a Product Entry
Product specifications define the performance expectations and limits which are used for comparison against measurement data gathered during validation test, simulation test, and production test.
- Configuring Specification Mapping Rules
Specification mapping rules determine relationships between product specifications and measurement data within the Specification Compliance Manager user interface.