Use the TSM default LabVIEW operator interface or STS Operator Tool interface to run tests and monitor test status. You can customize each TSM default operator interface to change the permissions, menu items, and controls an operator can access.

Note The TSM default operator interfaces do not support executing sequences that create additional executions.
 

Default LabVIEW Operator Interface

The default LabVIEW operator interface contains the following features:

  • Configure Station—Launch the Configure Station Settings dialog box.
  • Configure Lot—Launch the Configure Lot Settings dialog box.
  • Open STS Maintenance Software—Launch STS Maintenance Software.
  • Login/Logout—Log in or out of the operator interface.
  • Exit—Exit the operator interface.
  • Command Buttons—Run, pause, or stop a single test or a test lot. You might notice a delay after you click the Pause button or the End Lot button because tests in progress must complete before pausing or ending the lot.
  • Statistics Indicator—Displays statistical information for a lot execution, such as cycle time and socket time or site part counts.
  • Tester Status Message—Displays the status of the tester.
  • Site Execution Data—Displays statistical and status information for each site.
  • Active STS Software—Displays the name of the active STS Software installed on the system.
    • If any component in the active STS Software is missing from the system, an error icon appears with a tooltip directing you to open STS Version Selector for more information.
    • If STS Version Selector is not installed, the installed TSM version is displayed.
  • Settings Table—Displays station and lot settings for the test program. You can customize this table.
  • View Mid-Lot Summary—Generate and display a Mid-Lot Summary test report.
  • View Reports—Generate and display reports for the current lot.
  • Bin Table—Displays information about the binning of DUTs for the current lot, such as the names of the soft bins, the associated hard bins, and the DUT counts for each site.

Default STS Operator Tool Interface

The default STS Operator Tool interface contains the following features:

  • A drop-down menu with the following options:
    • Configure Lot—Launch the Configure Lot Settings dialog box.
    • Configure Station—Launch the Configure Station Settings dialog box.
    • View Mid-Lot Summary—Generate and display a Mid-Lot Summary test report.
    • View Reports—Generate and display reports or the current lot.
    • Open STS Maintenance Software—Launch STS Maintenance Software.
  • Command Buttons—Run, pause, or stop a single test or test lot. You might notice a delay after you click the Pause button or the End Lot button because tests in progress must complete before pausing or ending the lot.
  • System Status—Displays the status of the system.
  • User Icon—Displays the user. Log in or out of the operator interface. Use the User Icon to temporarily access administrative privileges and view additional Failure Analysis details by clicking the button.
  • Yield—Displays the socket, index, and cycle times.
  • Test Settings—Displays station and lot settings for the test program.
  • Failure Analysis—Displays detailed statistics for the lot or last 10 tests. Use the drop-down menu to specify which set of statistics to show. Use the or buttons to toggle between the list view and grid view data visualization layouts, respectively. In grid view, hover over each cell in the table to see a tooltip with additional information.