Connecting to the Development Computer Over a Network

To connect over a network, the device must be on the same subnet as the development computer. Complete the following steps to connect the device to the development computer over a network.
  1. Verify the development computer is powered on and connected to the network.
  2. Connect one end of an Ethernet cable to the network port on the device.
  3. Connect the free end of the cable to an Ethernet switch or other network device on the same network as the development computer.
  4. Verify the ACTIVITY/LINK LED on the port is on or blinking.
The device negotiates an IP address when connected to a network with a DHCP server or comparable network device.