TestScale is designed for use in a test system that requires hardware, drivers, and software to optimize TestScale for your application. Use the following list of typical TestScale system components as a starting point for building your test system.

Table 1. TS-15000 Components
Component Name NI Part Number
Front-Panel In-Fixture Assembly 136484A-01
Standoffs; 4-40, 3/16 Hex, 5/16 Thread Length, M/F 746037-01
Assembly Side-Panel 136482A-01
Screws; M3 x 0.5 x 4 mm Flat 741707-01
Screws; SS, Pan Head Phillips, M3 x 0.5, 4 mm 743102-01
Standoffs; M3 x 6 mm, F/F 745758-01
Standoffs; M3 x 6mm, M/F 746182-01
Support Panel 137394A-01
(Side Mount Option) Side Mount Panel 136486A-01
(Side Mount Option) Rear Panel 136487A-01
(Direct Mount Option) Rear Panel with Tabs 136485A-01
(Direct Mount Option) Module Panel 136483A-01
Table 2. TS-15010 Components
Component Name NI Part Number
Backplane Assembly 135839B-01L
Front Panel 137987A-01L
Standoffs; 4-40, 3/16 Long M/F, 3/16 Hex 746333-01
Screws; M3 x 0.5 x 4 mm Flat 741707-01
Rear Bracket 137393A-01
Screws; M3 x 5 mm, Pan Head Phillips 743097-01
(Two-Unit Option) Center Panel 136477A-01

Additional Components

  • USB cable (to connect to host computer)
  • Host computer running Windows
  • Application software (such as LabVIEW), if not already installed
  • NI-DAQmx driver
  • Number 1 and number 2 Phillips screwdrivers
  • Core Module
  • Selected TestScale I/O module(s)
  • DC power source